Product info
ATTENTION: Remove any coatings beforehand using Finalit No. 5 Coating Remover!
Application areas
- Removal of formwork oil on exposed concrete surfaces.
- "Fresh" grease and oil stains still on the surface (removal by saponification).
- Also removes small fresh stains, e.g. blood, cola, milk, wine, coffee, jam, etc.
- Xylolite floors (wood shavings and cement). Vacuum away No. 1 immediately; otherwise, the chippings swell.
- For all natural and engineerd stones!
ATTENTION! Finalit No.1 may have a caustic effect on polished soft stone (e.g. marble, limestone)! You need to make your own tests.
application
- Can be diluted up to 1:20 with water depending on the degree of soiling.
- 1 litre is sufficient for 80 m².
- Apply, rub in with a brush.
- Allow to soak for 5-10 minutes.
- Then thoroughly rinse with water.
Short Video Note: after viewing, to return to Finalit StoneCare Canada, close Short Video browser tab.
Application Sheet Note: after viewing, to return to Finalit StoneCare Canada, close Application Sheet browser tab.
pro tips
Special stain removal, such as grease stains, red wine stains, etc.:
- Apply Finalit No.1 undiluted.
- Cover with plastic sheet.
- Exposure time 1 to 12 hours.
- Then thoroughly rinse with water.
- Finalit No.1 may have a slightly caustic effect on polished soft stone.
- You need to make your own tests.