product info
ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!
Siliconise wooden connections on the floor (e.g. doorframes) with transparent silicone.
ATTENTION! Do not handle with open flames. No smoking. Risk of ignition!
Application areas
- Grease/oil/wax/candle wax.
- Grease rims of silicone joints.
- Suitable for all natural and artificial stones!
- You need to make your own tests!
application
- Use undiluted.
- 1 litre is sufficient for 5 m².
- For very heavy stains, preclean with No. 1, cover the area with plastic sheet and let set over night.
- Rinse well with water.
- Make sure to shake No. 11 before using. Apply a layer as thick as a knife with a spatula.
- The exposure time is approx. 30 minutes. Multiple applications may be necessary with intensive soiling.
- Rinse with Finalit No.1 diluted 1:20 with water - neutralise.
- Then thoroughly wash off with water.
- You need to make your own tests.
Short Video Note: after viewing, to return to Finalit StoneCare Canada, close Short Video browser tab.
Application Sheet Note: after viewing, to return to Finalit StoneCare Canada, close Application Sheet browser tab.
pro tips
- Especially suitable for removing candle wax from tombstones!
- Grease rims of silicone joints (there is no grease-free silicone - even marble silicone (low in grease in itself) sometimes causes grease rims or stains when exposed to heat.
- Solvent residues frequently appear as grease residues in the stone, allow to dry well.
- Application is required several times if the surface is impregnated with grease "sweating".
- Cover with a plastic film in order to prevent premature drying; the exposure time is approx. 1 hour.
- 30% No.1 additive, increases the effect and is a replacement for solvents, large-scale application. with a machine and silicone brush - no smearing with these brushes as they have stiff bristles!