product info
If the stains are under an existing coating (impregnation), the coating has to be removed using Finalit No. 5 Coating Remover first before commencing with the actual stain removal. If the stains are in an existing coating (impregnation), then only the coating has to be removed using Finalit No. 5 Coating Remover.
ATTENTION! ONLY USE ALONE, DO NOT MIX WITH OTHER PRODUCTS! Vapours will form!
Application areas
- Application is possible on polished marble.
- Coffee/cola/red wine
- Milk/honey, etc.
- Bleaching function with residues ("shading") from colour pigments (e.g. graffiti and algae residues).
- Suitable for all natural and artificial stones!
ATTENTION! Finalit No.12 may have a caustic effect on polished soft stone (e.g. marble, limestone)!
You need to make your own tests.
application
- Can be diluted up to 1:5 with water depending on the degree of soiling.
- 1 litre is sufficient for 20 m².
- Generously apply Finalit No. 12 Stain Killer onto the stain.
- The exposure time is up to 1 hour.
- With stubborn stains, repeat the application and increase the exposure time if necessary.
- Apply Finalit No.1 diluted 1:20 with water-neutralising.
- Allow to act for about 5–10 minutes.
- Thoroughly rinse with water.
- Suitable for all natural and artificial stones!
ATTENTION! Finalit No.12 may have a caustic effect on polished soft stone (e.g. marble, limestone)!
You need to make your own tests.
Short Video Note: after viewing, to return to Finalit StoneCare Canada, close Short Video browser tab.
Application Sheet Note: after viewing, to return to Finalit StoneCare Canada, close Application Sheet browser tab.
pro tips
- After applying Finalit No. 12 Stain Killer, cover with a plastic film in order to accelerate the stain removal.
- Can be diluted up to 1:5 with water depending on the degree of soiling.
- 1 litre is sufficient for 20 m².
- Suitable for all natural and artificial stones!