product info
ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!
Moisten the surfaces with water before working and, where possible, apply from the bottom to the top!
Application areas
- Extremely powerful lime remover.
- Crystal water stain remover.
- Intensive basic cleaner for lime, salt and gypsum efflorescence.
- Suitable for all natural and artificial stones, except polished soft stone!
ATTENTION! Not suitable for polished softstone (e.g. marble, limestone)!
You need to make your own tests.
application
- Can be diluted up to 1:20 with water depending on the degree of soiling.
- 1 litre is sufficient for 80 m².
- Attention! Roughen up closed layers of lime with a coarse brush or sandpaper.
- Generously apply lime solvent to the surface to be cleaned and allow to act for 5–10 minutes.
- Brush off with a rough brush or sponge.
- Then thoroughly rinse with water.
- Apply Finalit No.1 diluted 1:20 with water for neutralising.
- Allow to act for about 5 - 10 minutes.
- Then wash off the entire surface well with water.
- If necessary, repeat the application and increase the exposure time.
- Take care with metals: cover them up!
- Suitable for all natural and artificial stones, except polished soft stone!
ATTENTION! Not suitable for polished softstone (e.g. marble, limestone)!
You need to make your own tests.
Short Video Note: after viewing, to return to Finalit StoneCare Canada, close Short Video browser tab.
Application Sheet Note: after viewing, to return to Finalit StoneCare Canada, close Application Sheet browser tab.
pro tips
- Extremely powerful lime remover (where possible, with lime layers that are very thick, burn away any lime flags layer for layer using a flame or Bunsen burner. Water in lime boils, thus exploding the lime; wear protective goggles. Important: Roughen-up the remaining layer of lime with a copper brush in order to allow No. 6 to take effect!)
- Crystal water stain remover (together with No. 8 Rust Solvent (1:1), moisten the surface first and allow to act overnight. A yellow film forms, that should be removed and neutralised using No. 1 (1:20).
- Lime on polished soft stone, remove using a ceramic brush grain 1000, dry, level 1 hand machine.