product info
ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!
Application areas
- Graffiti.
- Graffiti on vehicles, car lettering.
- Graffiti on traffic signs.
- General adhesive residues and carpet, including adhesive.
- Lacquer and varnish residues.
- Discolourations from felt-tipped pens, pencils.
- For all natural and artificial stones!
ATTENTION! Finalit No.7 may have a caustic effect on polished soft stone (e.g. marble, limestone)!
You need to make your own tests.
application
- Use undiluted.
- 1 kg is sufficient for 10 m².
- Where possible, heat the surfaces to be treated.
- Apply using a sponge, brush or scraper.
- Exposure time approx. 5 – 60 minutes, then rub off or remove the coating using a scraper.
- Then thoroughly rinse with water.
- Clean surfaces as well as tools with Finalit No.1 Intensive Cleaner.
- In special cases, it may be necessary to allow for a longer exposure time or to clean a second time. When removing graffiti on painted surfaces, the maximum exposure time is 30 seconds.
- You need to make your own tests!
Short Video Note: after viewing, to return to Finalit StoneCare Canada, close Short Video browser tab.
Application Sheet Note: after viewing, to return to Finalit StoneCare Canada, close Application Sheet browser tab.
pro tips
- Graffiti removal and then cleaning, remove any rust discolouring with No. 12.
- Graffiti on vehicles, car lettering, exposure time max. 3 minutes.
- Graffiti on traffic signs, the maximum exposure time is 20 seconds in order not to damage the reflective film.
- General adhesive residues and wallpaper including glue, exposure time up to 12 hours.
- When removing graffiti on painted surfaces or film, the maximum exposure time is 30 seconds.
- For the removal of adhesive residues on glass, paint, Plexiglas.