product info
ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!
Moisten the surfaces with water before working and, where possible, apply from the bottom to the top!
Application areas:
- Large-scale removal of lime efflorescence.
- Removes lime and cement residues.
- Mortar and grouting residues.
- Specialist for lime, salt and gypsum efflorescence.
- Does not damage fine stoneware with metallic surfaces.
- Suitable for all natural and artificial stones, except polished soft stone!
ATTENTION! Not suitable for polished softstone (e.g. marble, limestone)!
You need to make your own tests.
application
- Can be diluted up to 1:20 with water depending on the degree of soiling.
- 1 litre is sufficient for 80 m².
- Attention! Roughen up closed layers of lime with a coarse brush or sandpaper.
- Using a brush or paint brush, apply diluted and rub in with a brush.
- Exposure time is approx. 5 - 60 minutes, then brush off the product with a coarse brush.
- Then thoroughly wash off with water.
- Apply Finalit No.1 diluted 1:20 with water for neutralising.
- Allow to act for about 5 – 10 minutes.
- Then thoroughly rinse with water.
Suitable for all natural and artificial stones, except polished soft stone!
ATTENTION! Not suitable for polished softstone (e.g. marble, limestone)!
You need to make your own tests.
Short Video Note: after viewing, to return to Finalit StoneCare Canada, close Short Video browser tab.
Application Sheet Note: after viewing, to return to Finalit StoneCare Canada, close Application Sheet browser tab.
pro tips
- Especially suitable for basic cleaning of ceramic tiles.
- Aluminium oxide (white pattern on the rear side); release agent so that the
tile does not stick to the conveyor belt,
when burning at approx. 1.100°C!
- Suitable for all natural and artificial stones, except
polished soft stone!